Solution Description

S&S electronic jacquard weaving looms are to utilise automatic controls to substitute mechanical sort jacquard weave device. They simplify the approach of production textiles with sophisticated styles. The SEJ3208S-19456 Digital Jacquard Machine is suited to make large and weighty styles cloth and is applicable to a variety of weaving looms, these kinds of as Rapier Loom , Air Jet Loom, h2o jet loom, Shuttle Loom, Projectile Loom.

Applicable to:Rapier loom, air jet loom, water jet loom, shuttle loom, projectile loom with any reed width.
Weaving Goods:
Label, tie, upholstery cloth, curtain fabric, shading material, sofa fabric, bedding cloth, towel, carpet, velvet, garment cloth, sari cloth, silk fabric, CZPT material and so on.
SEJ3208S
Hooks: 19456
Shed Opening: fifty five-120mm
Max Pace: 550 rpm

S&S packaging employing cartons, fumigated picket pallet, fumigated wood box packaging, and so on.
Module-connected merchandise: we use cartons with plastic pallets within the bins and wrapping films in the outer boxes.
Selvage jacquard gear: packed in fumigated wooden box.
Electronic jacquard tools: packed by wooden pallet and watertight wrapped film.

 

ZheJiang S&S Intelligent Science and Technology Co.,Ltd. is a higher-tech business with
registered capital of twenty million yuan, covers an region of 104 mu, workshop and place of work places are
about 52000 square meters. It is a large-tech company which is engaged in high-conclude jacquard weaving tools and its important components investigation, growth, generation, operation
and support and so forth. It has very good electronic jacquard machine production ability in the globe, and
is 1 of China’s industrialization foundation of electronic jacquard machine. Customers are all more than
the globe.


S&S’s service groups are all over the entire world. It has set up many overseas workplaces to offer customers with all-round
companies so as to meet customers’ demands. We are on contact at the very first time and give expert and best services
to international customers, issues encountered in creation will be solved immediately.
In purchase to deliver much more comfort to consumers, our engineers will offer on-web site installation guidance providers and give
education for related technological personnel.
Problems relevant to the procedure of goods, abroad consumers can check with nearby brokers for assist. If the problem still can’t
be solved, then consumer could speak to us by means of World wide web or telephone for even more support. If necessary, we will set up skilled
engineers to provide on-site support.

Q: Are you a manufacture or buying and selling organization?
A: We are a manufacturer. We have a lot more than 20 years’ knowledge in study, improvement and producing of jacquard
and related add-ons. )

Q: Where is your factory positioned? How can I visit it?
A: Our manufacturing facility is found in ZheJiang , China. It is about 5 hours driving from HangZhou, 6 hrs from ZheJiang port, welcome to
visit us.

QHow about our quality and after support?
A: We carry out extremely strict quality handle in every single production process, even a hundred% high quality evaluation and check prior to
transport.
Our after-service group can provide you technical assist on set up or on the problems that you encounter in the use.
In India, we can give the support on spot, and other places by movie.

Q: Following an buy is positioned, when can you ship?
Generally about thirty days. If we have stock, we can organize shipment inside 7 times. Kindly remember to be mentioned that our
manufacturing direct time depends on specific items and merchandise quantities.

Q: What’s payment conditions?
A: We prefer TT, thirty% in sophisticated payment+70% compensated before cargo.but also settle for L/C.

Q: Which technique of transport would be far better?
A: Generally we advise to ship by sea to save freight cost. But we also can follow other transportation strategy you ask.

Q: I want to be your agent in my region, is it alright?
A: Of course, no dilemma. We are seeking forward to long-phrase associates with substantial potential.

Searching for perfect High Speed Air Jet Loom Jacquard Manufacturer & supplier ? We have a broad variety at excellent prices to help you get creative. All the High Performance Air Jet Loom Jacquard are good quality assured. We are China Origin Factory of Terry Air Jet Loom Jacquard.
 

 

US $2,000-77,000
/ Piece
|
1 Piece

(Min. Order)

###

Type: Jacquard Loom
Voltage: 220V
Computerized: Computerized
Precision: High Precision
Certification: CE, ISO9001: 2000
Warranty: 1 Year

###

Customization:
US $2,000-77,000
/ Piece
|
1 Piece

(Min. Order)

###

Type: Jacquard Loom
Voltage: 220V
Computerized: Computerized
Precision: High Precision
Certification: CE, ISO9001: 2000
Warranty: 1 Year

###

Customization:

Pin chain conveyor

The choice between roller chains and friction drives depends on the usage environment. Roller chains are more resistant to dirty environments and are more suitable for conveying bulk products. The pivot chain is designed to handle highly bulk products. Ideally, the center-to-center distance between the two axles should be thirty to fifty times the chain pitch. The size of the sprocket will depend on the usage environment, which will also determine the fatigue strength and resistance of the chain.

Roller chains are more resistant to dirty environments

There are some key differences between drive chains and roller chains. The most notable difference is in the materials. Drive chains are generally more durable than roller chains. However, both chains are prone to dirty environments. While solution chains are sometimes used for heavy-duty tasks, roller chains are often used in dirtier environments. In fact, drive chains are often used when the job is very dirty and the chain has to slide on the rails.
The new lubricant used on the roller chain attracts dirt and other debris to the surface of the chain and prevents lubricant from entering the load-carrying parts of the chain, such as hinge plates, bushings, and rollers. When dust is drawn into these components, lubricants, and dirt form an abrasive paste that accelerates wear.
Lube-free roller chains keep chains clean longer. This makes it easier to specify and install in areas with strict hygiene requirements. CZPT lube-free roller chains meet NSF-H1 lubrication standards. However, lubricated roller chains are still suitable for areas where food contact is unlikely.
Stainless steel roller chains are particularly resistant to acids, alkalis, and low-temperature environments. Since stainless steel is softer than carbon steel, lubricants are not as effective at preventing dirt from entering the chain. Stainless steel roller chains have a higher strength rating than standard chains, but are not as strong as chains made from carbon steel. If you are using a roller chain in a very dirty environment, you should use a stainless steel chain.
chain

A stud chain is more efficient than a friction drive

The present invention relates to a light-duty double-ended chain that is more efficient than conventional chains. Stud chains are made by die-forging bar steel into roughly the-shaped links. This method avoids loss of shear strength due to bending and also minimizes the welded portion. The double-headed chain is light in weight and has strong resistance to fatigue damage.
This chain type has a stud-style design. Stud-shaped design provides greater tensile strength and prevents tangling. Each stud is formed by die forging and is usually shaped like an e or th. However, it is not necessary for each stud to have a uniform cross-sectional shape. Different cross-sectional shapes can be used depending on the application.
Stud chains are more efficient than friction drives because the studs in the chain are integrated. Stud links resist large breaks. Its applications are in conveyor chains and fisheries. Wear tested on boat chains made of SBC material. In the process, bolt chains were found to be more efficient than friction drives. Its applications are rapidly expanding.
Double-ended chains are more efficient for high-load applications. It features studs throughout its internal width to prevent kinking. Chains of this type are commonly used for heavy lifting machinery. Other types of chains are roller chains, power transmission chains, and bushing roller chains. These types of chains are also widely used in motorcycle, bicycle and transportation applications. In addition to being more efficient, stud chains also have fewer wear problems than friction drive chains.
A study on the difference between wear percentage and friction time showed that stud chains are more efficient than friction drives. The friction strips were measured at the beginning of the test. Take it off after 6 hours, 10080 times, and take pictures with the same diameter. As a boundary value, the diameter of the friction strip is smaller than that of a conventional chain. This shows that the present invention has better wear resistance than friction drives.
chain

Shaft chains designed for conveying bulk products

Pivot chains are versatile conveyors used in many applications. Low back type, small backrest distance, rear opening design to prevent the product from sticking to the joints and causing stiffness. Stainless steel and carbon bushing pin chains do not have pre-rotating rollers. In contrast, bucket elevators do not use pivot chains.
CZPT pin chains provide unmatched performance in agricultural and industrial machinery. They are constructed from a single cast barrel and are connected by hardened steel pins. CZPT’s steel pivot chains are strong enough to withstand the corrosive environments of agricultural and industrial applications. The steel pins in the CZPT Pintle Chain are hardened and riveted to ensure long-term durability and optimum performance.
Lifeguard chains feature patented interlocking side links that reduce gaps between adjacent side panels. They can withstand a variety of applications and will never break under pressure. These chains are available in 1/2” and 1” pitch configurations. CZPT combines both types of pin chains to achieve the best of both worlds. CZPT features dual pin chains and pin joints to increase chain durability and reduce maintenance hassles.
CZPT’s engineering team can custom design pivot chains for your specific application. Designed for specific speed, friction, temperature and wear requirements, these chains are ideal for a variety of applications. Headquartered in Milwaukee, Wisconsin, the company operates on two strategic platforms: Food and Beverage and Industrial Applications. The products of these companies are used in food, energy and manufacturing.

China 19456 Hooks Electronic Jacquard Machine 220V Crank and Chain Transmission     drives roller chainChina 19456 Hooks Electronic Jacquard Machine 220V Crank and Chain Transmission     drives roller chain
editor by czh 2023-01-17